Before you can begin exploring with your new PowerRay, it's necessary to register with the Vision+ app and activate the vehicle. The steps below will guide you through registration and activation, so you can start diving as soon as possible. First, follow the below steps to register:

  1. Download the Vision+ app.
  2. Make sure that you are connected to a WiFi network or has data on your sim card
  3. Launch the Vision+ app and select the button "REGISTER".
  4. Provide an email address and press "GET CODE".
  5. A verification code will be sent to the email address you provided. If you do not receive this email, try checking your spam folder. It may take some time to receive this email. You can use register from here as well.
  6. If you didn't receive your verification code after a minute, please try use other popular email service like gmail, and so on 
  7. Once you have received the code, you can log into the Vision+ app. You can change your password and make other adjustments to your account in Settings.


Activation:


Please use Android Phone or iPhone try to activate the the PowerRay instead of using Tablet.


Please follow below steps to activate.

  1. Make sure PowerRay, cable and base station are connected, and PowerRay, base station and controller are all turned on.
  2. Connect your phone to the network "PRA_station_xxxxxx" with password "1234567890".
  3. Launch the Vision+ App.
  4. You should be able to see "Activate Immediately" button under the PowerRay icon
  5. After you press the "Activate Immediately" button, you should be able to activate the Unit